Product Introduction
The machine is controlled by a computer system, and the applied slapping force is sensed by the load cell and controlled by the computer. The system has fast sensing and precise control, and the test results are accurate and stable.
1. Power display: computer display
2. Maximum capacity: 100kg
3. Angle: The racket angle can be adjusted within 250°
4. Machine control method: use AC motor drive and control by computer system
5. Elongation: two types of mm/inch can be switched
6. Resolution: 1/200000
7. A/D speed: A/D captures 1300 times per second
8. Accuracy: <±0.5%
9. Strength value unit: G/KG/N/LB 4 types of units can be switched
10. Volume (W×D×H): 60cm×40cm×100cm
11. Weight (approx): 225kg
12. Power supply: 1∮, AC220V, 10A
1. Power display: computer display
2. Maximum capacity: 100kg
3. Angle: The racket angle can be adjusted within 250°
4. Machine control method: use AC motor drive and control by computer system
5. Elongation: two types of mm/inch can be switched
6. Resolution: 1/200000
7. A/D speed: A/D captures 1300 times per second
8. Accuracy: <±0.5%
9. Strength value unit: G/KG/N/LB 4 types of units can be switched
10. Volume (W×D×H): 60cm×40cm×100cm
11. Weight (approx): 225kg
12. Power supply: 1∮, AC220V, 10A
