Product Introduction
This machine is used to simulate the fatigue test of the bicycle wheel frame, and can be set to do dynamic fatigue test of the left and right yaw.
1. According to the standard: EN14781, EN14764 test standard requirements
2. Can be used for the front / rear wheel drum wheel
3. Test action:
3.1. group before and after the rim inclined / jump block fatigue test.
3.2. drop impact test.
3.3. inertia wheel can be left and right displacement.
4. Test action:
4.1. inclined / jump block (first inertia wheel), 2 free fall (impact) (second - 3 inertia wheel) cycle.
5. Applicable size:
5.1. drum thread shaft diameter: 8mm ~ 12mm.
5.2. drum width: 95mm to 150mm.
5.3. is 20 inches - wheel diameter: 29 inches
6. Institutional systems:
6.1. inertia rotary power mechanism: AC motor.
The inertia wheel diameter: . w 550mm w 200mm
6.3 top speed per hour 60km/hr.
6.4. load mechanism: Mining weight superimposed load, maximum load 100kg pneumatic release and lift.
6.5. beat block: according to the EN standard system
6.6. lifting mechanism (impact): the lifting of the pressure cylinder, the trip max75mm.
6.7. tilt mechanism: AC motor,
6.8.: the maximum tilt angle can reach +/- 5
7. Electronic control system:
The inertia wheel speed detection:
7.3. color man machine interface control /PLC control
7.7. power supply: AC-220V. three phase
1. According to the standard: EN14781, EN14764 test standard requirements
2. Can be used for the front / rear wheel drum wheel
3. Test action:
3.1. group before and after the rim inclined / jump block fatigue test.
3.2. drop impact test.
3.3. inertia wheel can be left and right displacement.
4. Test action:
4.1. inclined / jump block (first inertia wheel), 2 free fall (impact) (second - 3 inertia wheel) cycle.
5. Applicable size:
5.1. drum thread shaft diameter: 8mm ~ 12mm.
5.2. drum width: 95mm to 150mm.
5.3. is 20 inches - wheel diameter: 29 inches
6. Institutional systems:
6.1. inertia rotary power mechanism: AC motor.
The inertia wheel diameter: . w 550mm w 200mm
6.3 top speed per hour 60km/hr.
6.4. load mechanism: Mining weight superimposed load, maximum load 100kg pneumatic release and lift.
6.5. beat block: according to the EN standard system
6.6. lifting mechanism (impact): the lifting of the pressure cylinder, the trip max75mm.
6.7. tilt mechanism: AC motor,
6.8.: the maximum tilt angle can reach +/- 5
7. Electronic control system:
The inertia wheel speed detection:
7.3. color man machine interface control /PLC control
7.7. power supply: AC-220V. three phase
