Product Introduction
This tester is used to test the braking quality and road test of the bicycle. It refers to the standard of DIN79100, EN14764, EN14765, EN14766, EN14718. The tester simulates the road and it is made of two wheels, and fixed the seat tube ,pedal,handle ,storage rack to the tester after loaded. For the road test , adjust the distance between front and back wheels based on the bicycle specification and continue to test in specified time at a rotation speed of 7~24km/hr , then check the bicycle is normal and have no damage of the component.
1.Maximum load :80kg
2.Distance adjustment range between front and back wheel :660~1200mm
3.Jump piece number and combination phase position :3pieces for 120 degree phase position, 4pieces for 90 degree phase position (optional)
4.Rotation speed:MAX30(km/r)set by the requirements
5.Control way : computer
6.Motive power :motor
7.Rotate speed : MAX 26km/hr
8.Additional weight (using weight stacked type):
9.Shake handle grip force :MAX180N
10.Water absorbing capacity:MAX 4ml/s
12.Rub rate:0.5~1
13.Sensitivity of the braking force :500kg load cell
14.Braking resolution:1/200000
15.Force measure precision :≦±1%
16.Speed test precision:≦±1%; display precision :0.1m/s
17.Power : 3Ø AC 220V, 30A
1.Maximum load :80kg
2.Distance adjustment range between front and back wheel :660~1200mm
3.Jump piece number and combination phase position :3pieces for 120 degree phase position, 4pieces for 90 degree phase position (optional)
4.Rotation speed:MAX30(km/r)set by the requirements
5.Control way : computer
6.Motive power :motor
7.Rotate speed : MAX 26km/hr
8.Additional weight (using weight stacked type):
9.Shake handle grip force :MAX180N
10.Water absorbing capacity:MAX 4ml/s
12.Rub rate:0.5~1
13.Sensitivity of the braking force :500kg load cell
14.Braking resolution:1/200000
15.Force measure precision :≦±1%
16.Speed test precision:≦±1%; display precision :0.1m/s
17.Power : 3Ø AC 220V, 30A
