Product Introduction
1. Based on standards: Japanese and German passenger car standards
2. Dedicated test platform (used at room temperature)
3. Rotary mechanism driven by Delta servo motor plus planetary reducer
4. Telescopic control of the robotic arm carried by the FESTO electric servo cylinder
5. Test mode: cyclic test mode Test times: 1 ~ 9,999,999 can be set
6. The minimum control angle is 0.1 degree
7. Unlimited reciprocating test angle range 0-360 degrees
8. Test speed range: 1~90 degrees/second
9. Clamping capacity of the manipulator clamp (car key or two fingers of the simulator): the space can be freely clamped by 4~40mm
10. The maximum measuring stroke and load can be input, automatically controlled by computer
11. Test action programming: According to different product requirements, you can set the action sequence requirements by yourself, according to the test method After the number is archived, there is no need to reprogram in the future, and you can quickly select and call the archived test method use .
12. The load unit displays N, kg, which can be switched freely.
13. Can be printed out by the computer (force vs displacement, force vs angle, force vs time, etc.) curves, Reports, etc., unlimited data storage.
14. The test conditions are set on the computer screen, which is convenient and quick (including test stroke, speed, times, pause time room, etc.).
15. The report is automatically generated without further input, and the output is in Excel format.
16. Technical parameters:
Measure the maximum load of 30kg
Minimum decomposition energy: 0.1g
Maximum effective measurement depth: 100mm
Minimum fine-tuning distance: 0.01mm
Measuring speed range: 0～100mm/min
Transmission mechanism: electric servo cylinder
Drive motor: Delta servo motor
Torsion sensor and load sensor two in one high-end sensor,
Capacity: maximum torque 30n.m, maximum push and pull force 100 kg
Torque resolution 1/50000
Minimum display torque 0.1 n.m
17. Software control, test steps programmed by the customer Test mode: single-step Test method & reciprocating rotation test method can display torque and push-pull test value, and record ,The maximum or average value of torque value and push-pull force during the test
18. Automatically save current data when power off
19. Simulate the load cabinet, simulate the on-off current and voltage of the switch when it is actually loaded. It can be monitored at any time Changes in voltage and current. (Power supply voltage DC 12-24 V can be set, load simulation 1 ~ 40 A can be set), the computer can monitor the voltage and current changes of the input and output terminals of all tests,
Set its safety qualified test range, once it exceeds the set range, it will automatically alarm and stop.
2. Dedicated test platform (used at room temperature)
3. Rotary mechanism driven by Delta servo motor plus planetary reducer
4. Telescopic control of the robotic arm carried by the FESTO electric servo cylinder
5. Test mode: cyclic test mode Test times: 1 ~ 9,999,999 can be set
6. The minimum control angle is 0.1 degree
7. Unlimited reciprocating test angle range 0-360 degrees
8. Test speed range: 1~90 degrees/second
9. Clamping capacity of the manipulator clamp (car key or two fingers of the simulator): the space can be freely clamped by 4~40mm
10. The maximum measuring stroke and load can be input, automatically controlled by computer
11. Test action programming: According to different product requirements, you can set the action sequence requirements by yourself, according to the test method After the number is archived, there is no need to reprogram in the future, and you can quickly select and call the archived test method use .
12. The load unit displays N, kg, which can be switched freely.
13. Can be printed out by the computer (force vs displacement, force vs angle, force vs time, etc.) curves, Reports, etc., unlimited data storage.
14. The test conditions are set on the computer screen, which is convenient and quick (including test stroke, speed, times, pause time room, etc.).
15. The report is automatically generated without further input, and the output is in Excel format.
16. Technical parameters:
Measure the maximum load of 30kg
Minimum decomposition energy: 0.1g
Maximum effective measurement depth: 100mm
Minimum fine-tuning distance: 0.01mm
Measuring speed range: 0～100mm/min
Transmission mechanism: electric servo cylinder
Drive motor: Delta servo motor
Torsion sensor and load sensor two in one high-end sensor,
Capacity: maximum torque 30n.m, maximum push and pull force 100 kg
Torque resolution 1/50000
Minimum display torque 0.1 n.m
17. Software control, test steps programmed by the customer Test mode: single-step Test method & reciprocating rotation test method can display torque and push-pull test value, and record ,The maximum or average value of torque value and push-pull force during the test
18. Automatically save current data when power off
19. Simulate the load cabinet, simulate the on-off current and voltage of the switch when it is actually loaded. It can be monitored at any time Changes in voltage and current. (Power supply voltage DC 12-24 V can be set, load simulation 1 ~ 40 A can be set), the computer can monitor the voltage and current changes of the input and output terminals of all tests,
Set its safety qualified test range, once it exceeds the set range, it will automatically alarm and stop.
